China Network 100% Working Solution For RDA 6625

Sometimes we face as problem that after replacing pa(RDA 6625) the network doesn't ok or Show Emergency only though there there is full signal appear.I have faced this problem for mane time and then I solved this problem by following way.The way is;after replacing pa (RDA6625) also replace two red marked capacitor shown on picture.                

     

 I think if you do this then it will solved your problem.You may also benefited from following posts............

Network Solution For RDA 6231

Network solution For RDA 6635

Network Solution For RDA 6645

Tested Phone:China touch Samsung Duos

China Earphone Logo 100% working Solution (V2 port)

For china earphone logo removing solution for V2 port just make a jumper from Battery (+) to Earphone plug in pin (Pin no.5 of Octenn T11) of Earphone/Charging connector as like as the picture shown bellow.If there is on any other problem;it will work 100% granted.For N95 port Earphone Logo Solution see this post and for V3 port earphone solution show this post For 6500 port earphone logo solution See this post
  
Note:Earphone/Headphone plug in pin may be different for different mobile.Such as,For Symphony B10i it is pin no.2 from left side of headphone/charging connector;For octenn T11 it is pin no.5 from right side of earphone/headphone connector.So to solve this problem you have to check every pin of headphone connector one by one.Remember that during checking time you have to power on your phone through DC Power Supply instant off Battery.If you power on your phone with battery during this time ,your may be damaged.So be careful about this.
                    

 This is Octenn-T11




Tested Phone:Octenn,Rangs,CCIT,Telego,Symphony,Experss,ZTE,Calme,China Nokia and much more.

All China Earphone/Headphone Logo solution (N95 Port)

For China Earphone logo removing solution for N95 connector just make a jumper from battery  (+) to earphone line in point like as picture bellow.If there is no any other problem it will work 100 granted.For V2 Port see This post And For V3 Port see This post.   For 6500 port earphone logo solution see this post


 Note:Earphone/Headphone plug in pin may be different for different mobile.Such as,For Symphony B10i it is pin no.2 from left side of headphone/charging connector;For octenn T11 it is pin no.5 from right side of earphone/headphone connector.So to solve this problem you have to check every pin of headphone connector one by one.Remember that during checking time you have to power on your phone through DC Power Supply instant off Battery.If you power on your phone with battery during this time ,your may be damaged.So be careful about this. 

 

Tested Phone:Symphony Ft10,Ft03,Ft04,D63,D100;Octenn,Kingstar Kingtell and much more