All China Earphone/Headphone Logo solution (N95 Port)

For China Earphone logo removing solution for N95 connector just make a jumper from battery  (+) to earphone line in point like as picture bellow.If there is no any other problem it will work 100 granted.For V2 Port see This post And For V3 Port see This post.   For 6500 port earphone logo solution see this post


 Note:Earphone/Headphone plug in pin may be different for different mobile.Such as,For Symphony B10i it is pin no.2 from left side of headphone/charging connector;For octenn T11 it is pin no.5 from right side of earphone/headphone connector.So to solve this problem you have to check every pin of headphone connector one by one.Remember that during checking time you have to power on your phone through DC Power Supply instant off Battery.If you power on your phone with battery during this time ,your may be damaged.So be careful about this. 

 

Tested Phone:Symphony Ft10,Ft03,Ft04,D63,D100;Octenn,Kingstar Kingtell and much more